Mobile Tower Light

• There are 1-generator units, 4 ea pack of lamps, 1 chest pole / stage of mask, 1 ea towing, 1 set of accessories (for KW26-952)
• Open up the unit from the packing and wood holder
• Install the stabilizer/outtrigger correctly so that the surface of the unit at the same height and also make sure the wheel flat and the wind filled 31-35 psi
• Put the towing at the base correctly, the hand brake on right position by installing a lock pin of bolt nut
• Make sure the unit flatness by adjusting of the foot and stabilizer including setting the wheels on towing
• Open the timber packing for the stage of the mast, put on slumber state and adjust the seat position (in the manual system)
• In the manual system, connect wire rope on wiches round
• Open the packing of lamp house and the lights in pairs (do not touch the lamp directly, use cloth upholstery)
• In the manual system, plug the lamp and put it in frame holder and make sure it is attached with the desired angle. In hydraulic systems, directly seated at stake on the condition of standing
• Set the slope of the house-lights from the lamp holder at the bottom of tower positions